A place where members show off their toys.
( Select a photo to view a larger Image )
| Page 1 | Page 2 | Page 3 | Page 4 | Page 5 |
Here's a picture of my son, Carl, and me working on a
Series 800 Clinton we picked up last June at
Coolspring for $5.00. We reseated the valves and
cleaned the gunk off of the inside of the head; it has
compression now. We're ready to tackle the electrical
system; needs a new coil. The fuel system will come
last. We'll probably have to rebuild the carburetor.
I noticed that someone expressed interest in Lawnboy mowers in
the message board so I thought I'd share a picture of the 1949
Lawnboy I own. The deck is 3/8 inch steel plate-real heavy duty.
My guess is that the mower weighs between 50 and 60 pounds.
This a picture of my Briggs & Stratton Model 6H. While it
appears to be a vertical shaft engine it is actually a
Model 6 "laid on its side" with a modified oil sump
and an oil pump. There is a pully on the PTO shaft
that was used to run the blade of a rotary mower ( I
even have the belt tightener idler pully ).
Unfortunately the mower was long gone before I
acquired the engine last spring.
Here's a picture of my recently restored 1956 Snapper
Snappin' Turtle mower with a Briggs & Stratton Model 8B engine.
Leonard Keifer
| Page 1 | Page 2 | Page 3 | Page 4 | Page 5 |
[
Home |
Club info |
Join the club |
Classified ads |
Member list |
Message board ]
[ Related links |
Technical board |
Members Gallery |
Technical data |
Manuals |
Parts / Services ]
[ Show board |
Tips board ]
This Web Site Designed and Created by
Dale Crane.
Please send Questions or Comments to the Club`s President
Dale
© 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 all rights reserved.
Last modified: 08 / 03 / 2005